Printing Tools

Our local Saturday morning market has several second-hand stalls which I enjoy trawling. Last weekend there was a basket of old kitchen tools from which I purchased several items. These cost me a grand total of NZ$2. Over the next few weeks I will experiment with these and let you know what results I get. You might like to let me know if you have any other ideas I can try.

My new printing tools

I have used the tea strainer to sift dry dye powder (like dusting icing sugar on to a cake) on to the fabric, then squirted on a stock solution (this could also have been done with plain water on to a Soda Ash soaked fabric). I found the solution very uncontrollable and the dyes spread rather more than I preferred.

This time I first applied the stock solution to the fabric with more care, then sifted on the dry dye powder. This I felt has turned out better, and I prefer these colours over the first attempt.

The fourth in my series of 12 pieces, each 22cm x 31cm (9" x 12"). Detail only. Eight more to do....

87 days to my exhibition

Discharge Variations

The other day I decided to do a quick experiment with discharge paste. I used a gutta nib and dispenser to quickly draw on some previous Procion MX dyed fabric. Then I placed it outside in some welcomed winter sunlight and left it to dry. Obviously in summer this would work a lot quicker! The sunlight certainly lightened the discharged lines on the fabric.

Discharge paste dried in the sun and then the right hand side has been steam ironed followed by washing to remove the discharge paste. Left hand side has had no ironing.

Discharge paste dried in sun.

Portions only of above steam ironed. I like the subtle variations in colours which result.

While at the Surface Design Association conference we were discussing irons in a workshop and it was mentioned that a travel iron was handy to get into smaller areas unsuccessful with a normal size iron. I purchased a travel iron years ago but it was never very good for the purpose of travel - it was heavy and used up too much of my weight allowance, so it has remained behind ever since. I have now retrieved it and found it good for ironing the smaller areas in the second sample above.

My (steam) travel iron next to the normal size iron.

90 days to my exhibition

Whoops, I'm late...

Since towards the end of last year I have been concentrating on producing (among other things) art pieces for another solo exhibition. All the work will be new. It will show my WholeCloth Banner art piece series, and a couple of installations. The exhibition title is Cloth and Dye Expressions, Diana Parkes. This is to be held at Expressions Gallery, 836 Fergusson Drive, Upper Hutt and will open on October 24 through to November 22.
Also on display will be an exhibition of work by the Upper Hutt Embroiderers' Guild. Many of the members of this guild attended my embroidery classes which I conducted in Upper Hutt (and also in Lower Hutt) for 27 years.

I have always liked working to a theme, and with a goal in mind. A solo exhibition is a big commitment, but at the same time very satisfying. It certainly can have its highs and lows. It gives permission to push oneself and to expand on ideas, as well as investigating technical possibilities. In the good moments I thrive on it; when they are not so good, well, I try to be positive and take it as part of the journey. I am well on the way to reaching the volume of work that I hope to exhibit, but the coming months will still have me on my toes.

And to help me keep focus for this exhibition (and to scare me as well!) I am putting a count down on my blog. My intention was to start at 100 days but I am a few days too late for that now(!) so today, Friday July 24 (NZ time)is day 92.....

Expressions Gallery, Upper Hutt

Chuffed, again

Last Friday was a great day. The weather was lovely, I gardened, got the washing dry on the clothes line, opened windows to air the house, and the birds were singing. Then I got an email to say that my entry into this year's Montana World of Wearable Arts had been accepted! A day for celebration indeed!
This entry is my fourth submission to WOW. I was successful in 2006 and 2007, unsuccessful in 2008, and now success again in 2009. It is not easy getting selected for this prestigious event, especially now that entries come from all around the world. It is certainly becoming a true international event of significance.
My entry this year is in the FOLD section. I am unable to show you this of course because of the rules, but here are my entries in 2006 and 2007. Both are being modelled my daughter-in-law Angela.

The Eye Catcher 2006

Spotty Dotty 2007

And on a totally different subject. I now receive a New Zealand blog called Over the Net and on the Table - more stuff about art than you can shake a stick at it claims. A recent entry was about the Swedish Bunny Project which uses the rabbit as a symbol of subversive activities. It showed the following images which at first glance look very threatening but look again and you will see that the dynamite sticks are carrots! I love it! How do people think of such things.....

Next Signal Designs

While at the Surface Design Association conference I visited the Merchants Venue (for me who usually has a stall at such events, it was very pleasurable wandering around browsing) and spent time at the stall of Next Signal Designs, owned and operated by Ruthie Powers. I was impressed with these contemporary rubber stamps, and purchased a couple. Below are some samples I have done using the Comb design. I like to mount (using carpet tape) any stamps I make or purchase on to clear perspec which allows for sighting the edge through the perspec thus allowing good registration. I also save small pieces of picture frame glass for the same purpose, but first taping the edges of the glass for safety. The Comb stamp has been secured to a piece of scrap perspec found in a gutter while out walking one day. As one edge was abit rough I have taped them all. I also like to put some sort of marking on the mounting to determine orientation when printing.

The Comb stamp 6cm x 12cm (2.5" x 4.5")

Below are some of my experiments with the Comb stamp. The first couple of images are just some different ways of using the stamp; and the third is a fat quarter.

Simple experiment with Comb stamp...

... and some more

Here I have used a pre-dyed background and created blocks with the stamp in alternating directions. A second colour has been printed over the top in a reverse direction. The colours have been reversed too in some blocks. I also masked circles of freezing paper on the fabric, and then added some stamped rings, green overlaid with white for added interest.

Working in a Series

Among other things, I am currently working on a series of 12 pieces linked because of their uniform size and the same base fabric (silk pongee). Each piece is 22.5cm x 31cm (9" x 12") which is the size of the blank silk screen I am using to work these pieces. Eventually they will hang as a group, four pieces wide, three pieces deep.
And if anyone is thinking that smaller pieces should be 'easier' than larger ones (which are more normal for me), then I would like to inform you that this is not so! Everything takes just as long to think through, prepare, then accomplish. I have now completed the third in the series.
Once again I have used some torn paper resists which I screened with pigment. The pigment is opaque and will often look 'heavy' compared to previous (dyed) applications. So before the pigment had dried (and before heatsetting) I washed the fabric and gave the pigment a light scrub. This removed some of the pigment and left a much more subtle result.

A detail showing the washed pigment application. I like the more transparent result and the outside edge definition

Now finished, detail only. On to the next one now.....

Feeling chuffed

Lovely surprise this week when I received the latest Surface Design Association e-newsletter, followed by the hard copy. On the cover are nine images from the members' exhibition at the recent conference which I attended. Over 200 pieces were displayed in this exhibition so I am delighted to see my piece featured in the centre of the cover of the newsletter. All pieces are 45cm x 45cm (18" x 18").

The SDA newsletter cover, my piece Three Sisters #3 is the centre image.

This last weekend I travelled to Rotorua for a family get-together. It was a great time just blobbing out and enjoying each other's company. On the way there I travelled over the Desert Road in the middle of our North Island and the mountains were stunning. Clear blue sky, crisp air and they seemed so close...

Mount Ngauruhoe

Mount Ruapehu